CTEK - 40-206 MXS 5.0 Fully Automatic 4.3 amp Battery Charger and Maintainer 12V

Description

Manufacturer      :CTEK
Model      :CTEK MXS 5.0
Product Dimensions      :1.02 x 5.91 x 2.36 inches
Cover Included      :1 CHARGER, CLAMPS, EYELETS
Unique reconditioning mode, built-in temperature sensing capabilities
Completely sealed Unit, spark proof and reverse - polarity protected
Premium input and output cable with robust strain relief
Input voltage 110-120 VAC
Minimum battery voltage required: 2V
From the manufacturer
ADVANCED CHARGING WITH TEMPERATURE COMPENSATION
12V Charger
The CTEK MXS 5.0 Battery Charger and Maintainer has a unique eight-step approach to battery care. A fully automatic microprocessor-controlled charger with a built-in automatic temperature sensor features a unique combination of advanced charging modes and makes the MXS 5.0 the fastest, most effective, and versatile consumer charger CTEK has ever made. Alligator clamps and eyelets included.
Taking Safety and Ease-of-Use to the Next Level
The CTEK MXS 5.0 Battery Charger and Maintainer reconditions and restores stratified and deeply discharged batteries. The unique 8-step charge approach to battery care for demanding AGM and EFB batteries (i.e. Optima). The charger is splash and dustproof, designed to protect vehicle electronics and non-sparking, reverse polarity protected, and short-circuit proof.
Features
Built-In, Automatic Temperature Sensor
Easy to read LED display
Splash and dust proof (IP65)
Safe, spark free operation
Reverse polarity protected
Short circuit proof
Charges batteries up to 110A
One Charger for All Your Vehicles
Built-In, Automatic Temperature Sensor for Fast, Effective Charge
Fully Automatic 8-Step Charging
Works for Cars, Trucks, Marine, Powersports, Agriculture
STEP 1 DESULPHATION:
Pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity.
STEP 2 SOFT START:
Tests if the battery can accept charge. Charging begins if the battery is OK.
STEP 3 BULK:
Charging with maximum current until approximately 80% battery capacity.
STEP 4 ABSORPTION, BATTERY READY TO USE:
Charging with declining current to maximize up to 100 % battery capacity.
STEP 5 ANALYZE:
Tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced.
STEP 6 RECOND:
Reconditioning function for deeply discharged batteries.
STEP 7 FLOAT, BATTERY FULLY CHARGED:
Maintaining the battery voltage at maximum level by providing a constant voltage charge.
STEP 8 PULSE, MAINTENANCE CHARGING:
Maintaining the battery at 95?100 % capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged.